CEITEC Nano Research Infrastructure
Brno University of Technology
Purkyňova 123, 612 00 Brno
Czech Republic
+420 54114 9207
nano@ceitec.vutbr.cz
Consumables | wh | ShP | i | feedback
Metallographic saw Labotom 5 (LABOTOM5)
Guarantor:
Jiří Holas
Instrument status:
Operational, 27.8.2021 14:23
Equipment placement:
CEITEC Nano - A1.03
Manual cut-off machine for 250 mm diameter cut-off wheels for rough cutting. The machine is equipped with a simple control panel consisting of start, stop, and flushing cleaning water buttons. The cutting table is 316 mm wide and 225 mm depth with five 10 mm T-slots for fixing workpieces holders. Labotom-5 allows to cut-off almost all kinds of materials.
Photogallery
Specification
| Cutting rotational speed | 2845 rpm (50 Hz), 3450 rpm (60 Hz) |
|---|---|
| Cut-off wheel (250 mm) speed |
37.2 m / s (50 Hz), 45.1 , m / s (60 Hz)
|
| Cut-off wheel diameter | 250 mm |
| Cut-off wheel thickness | 1–1.5 mm |
| Cut-off wheel hole | 32 mm |
| Flange for cut-off wheel diameter | 62.5 mm |
Cutting chamber
| Width | 310 mm | |
|---|---|---|
| Height |
49 mm
|
|
| Width (left side) | Passage for protruding workpieces | 120 mm |
| Height (left side) | 42 mm | |
| Diameter (left side) | 90 mm | |
| Width (right side) | 16 mm | |
| Height (right side) | 16 mm |
Cutting table
| Width | 316 mm |
|---|---|
| Depth | 225 mm |
| T-slots |
10 mm, 5 pcs
|
| Max cutting diameter | 90 mm |
Available cut-off wheels
| 60A25 |
cutting of extra hard ferrous metals (>HV 600)
|
|---|---|
| 40A25 | cutting of medium hard ferrous metals (HV 300–450) |
| 20A25 | cutting of very ductile metals (e.g. titanium) (HV 70–400) |
| MOD25 | cutting of ceramics (> HV 800) and minerals |
Documents
Here is place for your documents.